A-A-54282
15 November 1990
COMMERCIAL ITEM DESCRIPTION
RACK, OPHTHALMIC LAP
The General Services Administration has authorized the use of this commercial item description.
This Commercial Item Description covers a lap rack used to efficiently store ophthalmic lap tools during periods of non-use in an optical fabrication laboratory environment.
Salient Characteristics:
The lap rack shall be designed to accommodate a minimum of 864, 3-1/2 inch diameter laps.
Shall be cylindrical in shape with a nominal height and diameter of 6 ft and 2 ft, respectively.
The shelves shall be constructed of 1/2 inch birch wood or an equivalent material which have the same or better mechanical properties.
Shall be equipped with at least four (4) heavy duty steel casters that will permit manual rotation while filled to capacity.
Workmanship. The rack shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One rack, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business